Casing and Crossover Spool Assy.

The casing spool assembly is manufactured under two design variants:

1. With slips and BREDA – type seal

The casing head spool is set over the casing head housing and consists of a slip assembly and primary and secondary seals for sustaining and sealing the production casing.

The side outlets may be flanged or threaded, as requested.

Data to be put down in the inquiry:

  • spool or crossover spool type
  • slip assembly type and size
  • size and rated pressure of the top flange, bottom flange and side flanges as well as size and rated pressure of the spool and crossover spool, if they differ from the values given by the standards
  • secondary seal size and type
  • primary seal size and type
  • temperature and service conditions
  • PSL and PR levels.

 

2. With C22 – type slips

Data to be put down in the inquiry:

  • spool or crossover spool type
  • slip assembly type and size
  • size and rated pressure of the top flange, bottom flange and side flanges as well as size and rated pressure of the spool and crossover spool, if they differ from the values given by the standards
  • secondary seal size and type
  • primary seal size and type
  • temperature and service conditions
  • PSL and PR levels.

For more information, please consult the wellhead equipment brochure here.

 

Order online